Question: How Deep Should Posts Be For A 6 Foot Fence?

How many feet apart should fence posts be?

eight feetTypically, fence posts are spaced between six and eight feet apart.

The corner posts are set first.

To align all of the posts in between, stretch a line from each corner post to work as your guide..

How deep should post be for 4 foot fence?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How do you keep fence posts from rotting in concrete?

Concrete absorbs water, which will lead to a faster decay of the wood. wrap your posts in blueskin from the concrete down. concrete is porous, and the posts will always be wet. keep the top of the concrete a few inches above grade, sloped away.

Is 1 ft deep enough for fence post?

You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.

How deep should a 10 foot fence post be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.

Do I need gravel under concrete?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.

How many bags of concrete do I need for a fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How long will pressure treated posts last in the ground?

40 yearsTherefore, if you are in the look for proper construction materials for your home, then consider investing in pressure treated wood. According to Forest Products Laboratory and other research agencies, pressure treated poles in the ground can stay up to 40 years without any signs of rot.

How long will wooden posts last in concrete?

Reason being that the old chromated copper arsenate (CCA) wood treatment was banned in 2004 and modern treatments are no where near as good. Life expectancy of posts now is anywhere from 18 months to 5-7 years max.

How deep should a 7ft fence post be?

When concreting fence posts into the ground, the posts should be buried a minimum of 600mm deep. The recommended depth for a 1.80m or 6 foot high fence is 760mm or 2′ 6″.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

How deep should a 8 foot fence post be?

In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level.

Should I use 4×4 or 6×6 fence posts?

Instead of 4×4 posts, go with 6×6 posts. The extra size makes a huge difference. It’s a smart place to invest a little extra in your fence, because if your posts distort after they have been set in the ground with concrete, they are extremely difficult to replace.

How high should my fence be off the ground?

two inchesIn most applications, a wood fence should be installed at least two inches off the ground. Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground.

What size fence post do I need for 6ft fence?

If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. … Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.